{"id":3510,"date":"2026-10-08T09:15:43","date_gmt":"2026-10-08T01:15:43","guid":{"rendered":"http:\/\/www.ciel-j.com\/blog\/?p=3510"},"modified":"2026-10-08T09:15:43","modified_gmt":"2026-10-08T01:15:43","slug":"how-do-you-add-a-logo-to-a-wooden-medal-40da-fa9c18","status":"publish","type":"post","link":"http:\/\/www.ciel-j.com\/blog\/2026\/10\/08\/how-do-you-add-a-logo-to-a-wooden-medal-40da-fa9c18\/","title":{"rendered":"How do you add a logo to a wooden medal?"},"content":{"rendered":"

If you\u2019ve ever received a wooden medal, you know the subtle pride that comes with it\u2014wood\u2019s warm, natural grain feels far more personal than a shiny, generic metal plaque, whether it\u2019s for a 5K race, a youth sports tournament, or a community volunteer milestone. As a long-time wooden medal supplier, I\u2019ve spent over a decade refining every step of the process, and adding a logo to a wooden medal isn\u2019t just about slapping a design on wood. It\u2019s a mix of material science, precision, and small, intentional touches that make the final product feel intentional, durable, and true to wood\u2019s character. Today, I\u2019m walking you through exactly how we do it at our workshop\u2014no fancy, out-of-the-box shortcuts, just the work we\u2019ve perfected over hundreds of thousands of medals. Wooden Medal<\/a><\/p>\n

<\/p>\n

First, let\u2019s start with the basics: choosing the right wood for your logo to land on. Not all wooden medals are created equal, and the wood\u2019s density, grain direction, and finish will make or break how the logo turns out. For most of our standard medals, we use solid basswood\u2014it\u2019s light, has a tight, uniform grain that doesn\u2019t warp easily, and takes detail far better than softer woods like pine or denser ones like oak (which is too coarse for fine lines). If a client wants a more rustic, vintage feel, we\u2019ll offer birch instead; its subtle grain adds a little warmth without competing with the logo. The absolute wrong choice here is MDF (medium-density fiberboard) or particleboard. Those are compressed wood products that have a fuzzy surface and shed tiny particles when cut or engraved, so the logo will never be sharp or long-lasting. We skip them entirely, even when clients ask for a lower cost option\u2014poor wood leads to a bad medal, and we don\u2019t cut corners on quality.<\/p>\n

Next, prepping the wood surface. You can\u2019t just pull a raw basswood blank out of the bin and add a logo; you have to sand it first. We use a sequential sanding process: start with 120-grit sandpaper to smooth out any rough edges or manufacturing marks, then move to 220-grit for a finer finish, and finish with 320-grit to get the surface as smooth as a notebook page. The key here is to sand with the grain, not against it. Sanding across the grain leaves tiny scratches that will make the logo look uneven, especially when we add ink or paint. Once sanded, we wipe every medal down with a lint-free microfiber cloth and a little denatured alcohol to remove all dust\u2014even a single speck of sawdust under the logo will leave a bump that\u2019s noticeable when you hold the medal.<\/p>\n

Now, the part everyone asks about: how we actually add the logo. For most standard orders (anything from 50 to 10,000 medals), we use laser engraving, but it\u2019s not the kind of random laser work you see at mall kiosks. We use a 40W CO2 laser, which is powerful enough to etch deeply into wood without burning it, and we calibrate it specifically for basswood settings: 15% power and 30% speed, give or take a tiny adjustment depending on the batch of wood. Why not a higher power? Too much heat will char the wood, leaving a black, fuzzy outline around the logo that looks cheap. Too low, and the engraving is too shallow\u2014it\u2019ll wear off after a few uses.<\/p>\n

Wait, what if a client wants a color logo? Not everyone wants a dark brown or black engraved line. For color logos, we use another method: pad printing. Pad printing is a lot different from old-school screen printing, and it\u2019s perfect for small, detailed logos on curved or uneven surfaces (like the slight dome we add to our medals for a classic medal shape). Here\u2019s how that works: we create a small silicone pad shaped like the logo, fill it with the exact ink color the client wants (we use oil-based inks that are non-toxic and fade-resistant), press it onto the pre-engraved or sanded wood surface, and wipe off any excess ink so only the logo stays. Pad printing is great for small runs, but if you have over 10,000 medals, laser engraving is more cost-effective, and we can add a clear topcoat later to make the logo pop.<\/p>\n

There is one case where we don\u2019t use laser or pad printing: if a client wants a raised (embossed) logo. For that, we make a metal die\u2014think of a custom stamp that\u2019s shaped like the logo\u2014heat it to a specific temperature, and press it into the wood. This is the method we use for high-end, premium medals, like for a national youth sports championship. The embossed logo has a tactile, 3D feel you can actually run your finger over, which feels way more special than a flat engraved line. The downside? It\u2019s only good for runs under 2,000 medals; making the die is expensive, so it doesn\u2019t make sense for bulk orders.<\/p>\n

Once the logo is added, we have to seal it. This is the step that makes the logo last for years, whether the medal is hanging on a wall or getting worn at a soccer game. We use a water-based polyurethane topcoat, which is non-toxic, doesn\u2019t yellow over time, and protects the wood and logo from scratches, moisture, and fading. We apply two thin coats, not one thick one\u2014thick coats will run and leave streaks, especially on the curved edges of the medal. After each coat, we let the medals dry for 24 hours in a climate-controlled room (we keep our workshop at 65 degrees Fahrenheit and 40% humidity\u2014too much moisture and the wood will warp, too little and the finish will crack). We also buff each medal by hand with a soft cloth after the final coat to give it a subtle, glossy finish that doesn\u2019t look plastic-y.<\/p>\n

I\u2019ve made my share of mistakes over the years, and those mistakes taught me the little details that make a wooden medal\u2019s logo stand the test of time. Early on, we tried using a generic laser setting for basswood, and half the batch came out charred. We lost a $10,000 order for a local marathon, and that\u2019s when we realized that every wood type needs its own calibration. Another time, we used a cheap pad printing ink for a little league order, and by the end of the season, half the logos had faded to nothing. That\u2019s when we switched to the oil-based inks we use now\u2014they don\u2019t rub off on kids\u2019 uniforms, and they don\u2019t fade in the sun.<\/p>\n

What if a client has a custom logo? No matter how complicated it is\u2014from a tiny sports team mascot to a large organization\u2019s full name\u2014we can work with it. The only rule we have is that the logo needs to have at least a 1\/16th of an inch space between lines; anything thinner and the laser will etch those lines together, making the logo unreadable. We always send a digital proof first, too\u2014before we run the full order, we send a sample photo of one medal with the logo, so clients can adjust anything (size, color, spacing) before we start production. We never make a full order without the client\u2019s written approval of the proof.<\/p>\n

<\/p>\n

Whether you\u2019re ordering wooden medals for a small community 5K or a large corporate recognition program, the process is all about balancing precision and the natural character of wood. It\u2019s not about making the wood look like metal\u2014it\u2019s about enhancing its warm, unique feel with a logo that means something to the recipient. If you\u2019re interested in placing an order or have questions about custom wooden medals, feel free to reach out to our team to discuss your needs, from logo design to bulk pricing. We\u2019re here to help you create medals that people will proudly keep for years to come.<\/p>\n

Wooden Trophy<\/a> References<\/p>\n

    \n
  1. "Wood Selection Guidelines for Laser Engraving and Printing" – Woodworking Network, 2022.<\/li>\n
  2. "Techniques for Pad Printing on Natural Substrates" – Printing Industries of America, 2021.<\/li>\n
  3. "Climate Control in Wood Finishing Workshops" – American Wood Council, 2020.<\/li>\n<\/ol>\n
    \n

    Pujiang County Hongxin E-commerce Co., Ltd.<\/a>
    As one of the most professional wooden medal manufacturers and suppliers in China, we offer a wide range of products with superior quality. Please rest assured to wholesale high-end wooden medal at competitive price from our factory. Good service and punctual delivery are available.
    Address: No. 6, Row 4, Section 4, Yuequan West Road, Pujiang
    E-mail: hongjiangluo95@gmail.com
    WebSite:     https:\/\/www.crystalcraftfactory.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019ve ever received a wooden medal, you know the subtle pride that comes with it\u2014wood\u2019s … How do you add a logo to a wooden medal?<\/span>Read more<\/a><\/p>\n","protected":false},"author":817,"featured_media":3510,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3473],"class_list":["post-3510","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-wooden-medal-4f63-fad8b7"],"_links":{"self":[{"href":"http:\/\/www.ciel-j.com\/blog\/wp-json\/wp\/v2\/posts\/3510","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.ciel-j.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.ciel-j.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.ciel-j.com\/blog\/wp-json\/wp\/v2\/users\/817"}],"replies":[{"embeddable":true,"href":"http:\/\/www.ciel-j.com\/blog\/wp-json\/wp\/v2\/comments?post=3510"}],"version-history":[{"count":0,"href":"http:\/\/www.ciel-j.com\/blog\/wp-json\/wp\/v2\/posts\/3510\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.ciel-j.com\/blog\/wp-json\/wp\/v2\/posts\/3510"}],"wp:attachment":[{"href":"http:\/\/www.ciel-j.com\/blog\/wp-json\/wp\/v2\/media?parent=3510"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.ciel-j.com\/blog\/wp-json\/wp\/v2\/categories?post=3510"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.ciel-j.com\/blog\/wp-json\/wp\/v2\/tags?post=3510"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}